|
Painting solid wood furniture is so easy to do, but did you know that you can even paint shiny, slippery surfaces like laminate, veneer and more? With just one extra step you can open the door to even more creative transformations using Dixie Belle Paint. Adding Slick Stick into your toolbox is a game changer!  What is Slick Stick? Slick Stick is a water based adhesion primer that will help paint adhere to slick surfaces. Slick Stick is not needed for all projects but it is a great problem solver for those where there may be some concern that the paint won’t adhere. What surface can I use Slick Stick on? Slick Stick can be used on surfaces that are not solid wood like, laminate, PVC, metal, glass, formica, ceramic, glossy surfaces and even Ikea furniture!  Glass  Laminate  Even pumpkins! Help! I can’t tell if my project is solid wood or laminate? Sometimes it can be a little tricky to figure out what kind of surface you are working with. If you are unsure if your surface is solid wood or laminate it is best to err on the side of caution and use Slick Stick. When should I apply Slick Stick? Slick stick should be applied after prepping your project. To "prep", start by giving your project a good clean with White Lightning, scuff sand with 220 sandpaper (as if you are wiping down your kitchen table) and wipe off any residue with a damp cloth. Now your surface is ready for Slick Stick! How do I apply Slick Stick? Make sure your Slick Stick is mixed well and give it a good shake. To avoid brushstrokes use a dry synthetic brush to apply Slick Stick. Having brushstrokes in your Slick Stick will cause texture in your paint finish.  Next, apply a thin coat of Slick Stick over the surface in long strokes. Make sure not to overwork it or go over a spot that has already begun to dry. Don’t worry if you happen to miss a spot on your first coat, you will get it with your second coat.  Once the surface is completely covered, let it dry for 2 to 3 hours.  After 2 to 3 hours, apply a final coat of Slick Stick over your project. Then let it dry overnight. The next day your surface will be prepped, primed, ready for paint and your creativity! Using Slick Stick opens the door to more DIY possibilities. Here are a few ideas of what you can paint when using Slick Stick. Happy painting!  laminate  Glass  Metal  Porcelain  Glass
0 Comments
Leave a Reply. |
|
RSS Feed
